Molibdén fűtőelemipari és laboratóriumi kemencékhez használt elektronikai alkatrész, amely főleg két szilicidet tartalmaz. Az ebből az egyedi anyagból készült elem jól bírja a felületén lévő anyag nagy teljesítménysűrűségét (például a 20 W/cm2-es elem felülete 1700 C-os elemhőmérsékletet, a 14 W/cm2-es elem felülete 1800 C fokot visel el, az 5 W/cm2 elemfelület 1900 C fokot is elbír), így az elem gyorsan keringhet.
A két szilicid fűtőelem molibdén alapú platinából készül, és magas hőmérsékleten oxidálódik. Levegőnek és magas hőmérsékletnek kitéve ezen alkatrészek felületét vékony szilíciumüvegréteg védi. Bár a mátrix kerámiát szilíciumhéj formájában fogyasztják, bomlási sebessége nagyon alacsony. Magas hőmérsékleten nagy teljesítményűek és nagy energiát termelhetnek egyszerre.
With the decomposition of cermet, the diameter of heating handle decreases, and the resistance components will increase continuously. The two silicide heating element does not show the aging of silicon carbide, metal Fe Cr Aluminum Alloy elements. Two silicified heating element can operate at high temperature, and has the longest life in the oxidizing atmosphere. They can operate in other atmospheres, but at lower temperatures.
Telepítés és használat
Due to the highest temperature and the highest power and the longest life, two silicified heating elements must be installed in a freeway. The elements must be placed far away from the wall of the furnace so that they can move naturally when they are affected by the release of internal stress, or when they are twisted and twisted with the electromagnetic action of the adjacent elements. We suggest that the use of furnace support devices include heating element support and heating element straps, so as to support and connect the terminal handle. At low temperature, the two silicified heating element is fragile and must be carefully operated. When the temperature reaches more than 1200 C, they become softer and relaxed under their own load, and when the components are heated to resist each other, they become the "Coca-Cola bottle" shape.
The two silicified heating element with the bent terminal can be installed through the side wall of the furnace lining. The heating element support is to ensure the terminal. When components are installed directly by means of refractories or touch insulation, they must be free to move. In the operation of this way, the maximum temperature of the two silicified "skin" will be reduced, and the change of pressure may lead to disastrous consequences.
Two, silicified molybdenum heating element shows a significant positive temperature resistance coefficient. When the component temperature is increased, the resistivity will also increase. When the component is launched at the very beginning, a very typical phase angle emitted by a thyristor rectifier with current limiting will control the high current at this time. After heating, its electrical resistivity increases, and the current flow is limited by itself.
ÜDVÖZÖLJÜK, HOGY ÉRDEKLŐDJÖN MEG AZ ÁRAKOR, ÉS LÁTOGATJA MEG CÉGÜNKÜNKET!
Elérhetőség:
E-mail: mail@refrachina.com
Telefon:86-29-85325399
Fax: 029-85325610
